A free year of photoKam RadarShare photos you took and edited in Radar on Showcase to get it.Learn more →
photoKam Radar 1.2.2
en
Buy nowFree download
User GuideEditing photosLight

Light

The basic panel for adjusting a photo's brightness and tonal contrast. It controls the overall brightness (Exposure), the difference between bright and dark areas (Contrast), only the bright or only the dark parts (Highlights · Shadows), and the brightest and darkest ends (Whites · Blacks).

On this pageWatch the videoWhen to use itWhere to find itSliders and buttonsStep by stepResultGood to knowFrequently asked questionsRelated topics

When to use it

  • When a photo is too dark or too bright overall — Exposure.
  • When a photo looks flat and hazy, or on the contrary too harsh — Contrast.
  • When the sky or the view through a window is blown out to white and you can't make out the clouds or the scenery — lower Highlights.
  • When a face is shaded by backlight, or shaded areas look heavy — raise Shadows.
  • When a photo isn't crisp and the whites are dull or the blacks look gray — Whites · Blacks.

Where to find it

The histogram and the Light panel

LIGHT (sun icon), the first panel at the top of the Edit tab, right below the histogram. This panel is expanded when you open the editor.

  • Each mask has the same sliders (named Exposure (EV) · Contrast · Highlights · Shadows · Whites · Blacks). Use them to adjust only the sky or a face (→ Masks).
  • Click Auto in the top bar and the 6 values in this panel are set to suit the photo in one step (→ Editor overview — Auto).

① The histogram shows the brightness distribution with the current adjustments applied (left end black · right end white). If the graph is piled high against one end, that end is crushed or blown out.

Sliders and buttons

No.NameRangeDefaultWhat it does
②Exposure-5.00 – 5.000.00Makes the whole photo brighter (+) or darker (−). 1.00 doubles the amount of light (one stop on a camera). The slider moves in steps of 0.05. When brightening, the brightest end is compressed gently so it doesn't clip abruptly to white.
③Contrast-100 – 1000+ makes bright areas brighter and dark areas darker for a crisper look; − reduces the difference for a softer look. Both ends are handled gently, so raising contrast rarely crushes blacks or blows out whites.
④Highlights-100 – 1000Darkens (−) or brightens (+) only the bright parts of the photo (from slightly below the midtones up to the brightest areas, more strongly the brighter they are). Use it to bring back texture in skies, windows and white clothes. Even when you lower it, the brightest whites stay as they are, and the tones below them are darkened step by step.
⑤Shadows-100 – 3000Brightens (+) or darkens (−) only the dark parts of the photo (everything below slightly above the midtones, more strongly the darker they are). Use it to bring back shaded faces or dark forests. Very dark backlit photos can be brightened past +100, up to +300.
⑥Whites-100 – 1000Raises (+, whiter whites) or lowers (−) only the brightest end. Midtone brightness stays almost the same.
⑦Blacks-100 – 1000Lowers (−, blacker blacks) or raises (+, a faded look) only the darkest end. Midtone brightness stays almost the same.
  • Highlights · Shadows adjust brightness over broad areas, so even at their extremes, fine textures and outlines such as skin texture and leaves stay intact.
  • If you type an exposure value in the number box, it's rounded to steps of 0.05 (for example 0.33 → 0.35).
  • For how to drag sliders, double-click to return to 0, fine-tune with Shift or type numbers directly, see Editor overview.

Step by step

The basic order (top to bottom)

  1. First set the overall brightness with Exposure

    Drag the slider left or right until the face or main subject is at a suitable brightness. The hill in the histogram moves toward the middle.

  2. Make it crisper with Contrast

    If the photo looks flat, start at about +10 to +30.

  3. Lower Highlights to bring back the sky

    If the sky or the view through a window is blown out to white, lower it to −30 to −70. Stop when the shape of the clouds comes back.

  4. Raise Shadows to brighten the shade

    Raise it until the shaded face is brighter. For backlit portraits, going above +50 is fine.

  5. Finish both ends with Whites · Blacks

    Raising whites a little and lowering blacks a little makes the photo crisper. It's about right when the histogram just about touches both ends.

  6. Compare

    Press Y (split view) and drag the center line to compare before and after.

Rescuing a face shaded by backlight

  1. First click Auto in the top bar. For photos with people, it measures face brightness and brightens the face mainly with Shadows. "· brightened shaded faces" is added to the message in the status bar.
  2. If it's still dark, raise Shadows further. Raising Exposure a lot blows the view through the window out to white, so raise exposure only a little.
  3. If the view through the window has become too bright, lower Highlights to bring it back.

Rescuing a sky blown out to white

  1. Lower Highlights to about −50.
  2. If the brightest part of the sky is still white, lower Whites a little.
  3. If the rest of the photo has become darker, raise Shadows a little to balance it.
  4. To adjust only the sky, create a sky mask with auto select → Sky in Masks, then lower Highlights in that mask.

Result

A face shaded by backlight at a café window — BeforeA face shaded by backlight at a café window — AfterBeforeAfter

The shaded face becomes brighter while the view through the window is kept. The face was brightened mainly with Shadows +90, and Highlights was lowered to −30 so that the view through the window wouldn't blow out to white.

A washed-out sky at the seaside — BeforeA washed-out sky at the seaside — AfterBeforeAfter

The texture of the clouds comes back in the sky that was blown out to white.

Good to know

Adjust from top to bottom

If you set the overall brightness with Exposure first and then adjust the rest, you'll go back and forth less. Clicking Auto first and refining from there is also a good approach.

Watch the histogram while you adjust

The histogram at the top of the Edit tab shows the photo with the current adjustments applied. The left end is black and the right end is white. If the graph is piled high against one end, that end is crushed or blown out.

Values other than 0 are shown in bold

You can see at a glance which sliders you've adjusted.

Highlights brings back texture that's still in the original

Areas completely blown out to white in the original turn gray when you lower Highlights.

The difference between Blacks and the DEEP BLACKS panel

Blacks is applied before presets, LUTs and curves. If blacks look gray because of a preset, bring them down with the Deep Blacks panel right below.

Auto overwrites the values in this panel

Auto in the top bar doesn't add to the current values; it analyzes the original and sets the 6 values anew. If you click Auto after adjusting by hand, your manual values change (one Ctrl+Z reverts it).

Applying a preset can change the values in this panel

If a preset includes light values, they're replaced with those values (→ Presets).

  • Changes made during one drag of a slider are grouped into one undo step. Press Ctrl+Z after releasing the mouse to go back to before the drag.

Frequently asked questions

What's the difference between Exposure and Shadows?

Exposure brightens the whole photo by the same ratio. Shadows brightens only the dark parts, leaving a bright sky or the view through a window almost unchanged.

What's the difference between Highlights and Whites?

Highlights adjusts a broad range of bright areas (the whole sky, a whole white garment); Whites adjusts only the brightest end (sparkles, the very whitest parts).

I can't enter the exposure value I want.

Exposure goes in steps of 0.05. If you enter 0.33, it becomes 0.35.

I raised Contrast and the colors got stronger too.

When the difference between light and dark increases, colors also look a little stronger. If they're too strong, lower Saturation or Vibrance in Color a little.

I want to apply these values to other photos as they are.

Click Copy edits, then on another photo click Paste and choose "Light". The Light group includes the 6 values in this panel together with the DEEP BLACKS panel and the TONE CURVE (→ Editor overview).

Get ExaPeak newsNew products, new versions and events, delivered by email.